Is GensAce planing Lipos for 1/18 cars?
Dimensions like 87mm x 33mm x 19mm, with 3.5 mm Connection female, 2S, 30C, 1800 or 1900 mA.
Would be very cool.

Dear Sir,

We do have an item for 1/18 car, pls. check this item B-25C-1800-2S1P in our website.

Have a nice day.

Best Regards,
Rainbow

I saw this item, but it is not in a Hardcase such as LRP uses it or CS Electronic. In our challenge it is not allowed to use Lipos without hardcase.

Hello Windstar

Many thanks for your interest in our products!
The newest 1/18 lipo for cars will be released at mid March for test.
The demision will be 92mm*33mm*20mm, is it suitable for your car?

Regards

Sophie

HI Windstar,

We also have 1:18 hard case battery and the size is 92mm*33mm*20mm , but there is no stock in Germany. We will send some to Germany next time. Our other customers used to order soft case for 1:18 car.

Rainbow

admin Wrote:
-------------------------------------------------------
> Hello Windstar
>
> Many thanks for your interest in our products!
> The newest 1/18 lipo for cars will be released at
> mid March for test.
> The demision will be 92mm*33mm*20mm, is it
> suitable for your car?
>
> Regards
>
> Sophie

Hello Sophie,

that sounds very good! The dimension should work too as you say.
If there were female 2 mm or 3.5 mm connectors instead of a cabel would be more than perfect.
If so, I would like to test them for the next saison.

Kind Regards

windstar

rainbow Wrote:
-------------------------------------------------------
> HI Windstar,

> Our other customers used to order soft case for
> 1:18 car.
>
> Rainbow


We have rules in our races, they say "hardcase". Your other customers will race on parkingplaces or else.

Kind Regards

windstar

windstar Wrote:
-------------------------------------------------------
> admin Wrote:
> --------------------------------------------------
> -----
> > Hello Windstar
> >
> > Many thanks for your interest in our products!
> > The newest 1/18 lipo for cars will be released
> at
> > mid March for test.
> > The demision will be 92mm*33mm*20mm, is it
> > suitable for your car?
> >
> > Regards
> >
> > Sophie
>
> Hello Sophie,
>
> that sounds very good! The dimension should work
> too as you say.
> If there were female 2 mm or 3.5 mm connectors
> instead of a cabel would be more than perfect.
> If so, I would like to test them for the next
> saison.
>
> Kind Regards
>
> windstar

Hello Windstar

I have forwarded your advise to our enginieer, once i got the feedback will post here soon.

Regards

Sophie

Windstar

Or can you show us a picture of the connectors ?

Regarde

Sophie

either like the LRP Lipo http://www.lrp.cc/de/produkte/vtec-akkus/lipo-competition-car-line/produkt/lipo-1800-competition-car-line-74v-28c/details/

or the CS-Electronic (would be better) http://www.cs-shop.de/Lipo+7-4V+1900mAh+CS-Factory+Professional+32C.htm

Regards

windstar

Hello Windstar

sorry , we have no these connetors in our products line.
Here we do advise that you can have a try with ours, it will bring you lower internal resistance than BULLET PLUG.

Regards

Sophie

windstar Wrote:
-------------------------------------------------------
> either like the LRP Lipo
> http://www.lrp.cc/de/produkte/vtec-akkus/lipo-comp
> etition-car-line/produkt/lipo-1800-competition-car
> -line-74v-28c/details/
>
> or the CS-Electronic (would be better)
> http://www.cs-shop.de/Lipo+7-4V+1900mAh+CS-Factory
> +Professional+32C.htm
>
> Regards
>
> windstar

The version of CS of adapter version seems great, but GENS Ace need make some effort to upgrade the hardcase.